lpr
Use the "lpr" command to view and configure LPR settings.
View Setting
msh> lpr
Checking host name when deleting the job
msh> lpr chkhost {on|off}
netware
Use the "netware" command to configure the NetWare settings such as the print server name or file server
name.
Netware Printer Server Names
msh> netware pname "character string"
• Enter the NetWare print server name using up to 47 characters.
Netware File Server Names
msh> netware fname
• Enter the NetWare file server name using up to 47 characters.
Encap type
msh> netware encap {802.3|802.2|snap|ethernet2|auto}
Remote Printer Number
msh> netware rnum {0-254}
Timeout
msh> netware timeout {3-255}
Printer server mode
msh> netware mode pserver
msh> netware mode ps
Remote printer mode
msh> netware mode rprinter
msh> netware mode rp
NDS context name
msh> netware context "character string"
SAP interval
msh> netware "sap_interval"
Remote Maintenance by telnet
239
To Next Page
Loading...
Need help?
General