Using the LPR Port
Installing the PCL or RPCS Printer Driver
• To install this printer driver under Windows 2000/XP Professional, Windows Server 2003, and
Windows NT 4.0, you must have an account that has Manage Printers permission. Log on as an
Administrators or Power Users group member.
• In an IPv6 environment, you cannot use the LPR Port. Use the SmartDeviceMonitor port.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PCL/RPCS Printer Drivers].
5. The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
7. Select the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
8. Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer
model, and port.
9. Click [Port:], and then click [Add].
10. Click [LPR Port], and then click [OK].
If [LPR Port] does not appear, see Windows Help and install it.
11. Enter the printer's IPv4 address in the [Name or address of server providing lpd] box.
12. Enter "lp" in the [Name of printer or print queue on that server] box, and then click [OK].
The port is added.
13. Check that the port of the selected printer is displayed in [Port:].
14. Configure the default printer as necessary.
Using the LPR Port
41
To Next Page
Loading...
Need help?
General