IP TTL setting
msh> bonjour ip ttl {1-255}
You can specify the IP TTL (the number of routers a packet can pass through).
• The default is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname
Reset the computer name. The default computer name will be displayed when the computer is
restarted.
• location
Reset the location information. The previous location information will be deleted.
Interface configuration
msh> bonjour linklocal "interface_name"
• If many types of interface are installed, configure the interface that communicates with linklocal
address.
• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the IEEE 802.11b interface unit is installed.
Interface Interface configured
ether Ethernet interface
wlan IEEE 802.11b interface
btconfig
Use the "btconfig" command to make Bluetooth settings.
View settings
Bluetooth settings are displayed.
msh> btconfig
Printer name configuration
You can set the Bluetooth operation mode to "private" or "public".
msh> btconfig {private | public}
• Default: public
6. Monitoring and Configuring the Printer
230
To Next Page
Loading...
Need help?
General