3. Save the file.
• When using a host name under Windows Server 2003 with IPv6 protocol, perform host name
resolution using an external DNS server. The host file cannot be used.
Printing Commands
The following explains printing operations using the "lpr", "rcp", and "ftp" commands.
Enter commands using the command prompt window. The location of the command prompts varies de-
pending on operating systems:
• Windows 95/98
[Start] - [Programs] - [MS-DOS Prompt]
• Windows Me
[Start] - [Programs] - [Accessories] - [MS] - [DOS Prompt]
• Windows 2000
[Start] - [Programs] - [Accessories] - [Command Prompt]
• Windows XP, Windows Server 2003
[Start] - [All Programs] - [Accessories] - [Command Prompt]
• Windows NT 4.0
[Start] - [Programs] - [Command Prompt]
• Match the data format of the file to be printed with the emulation mode of the printer.
• If the message "print requests full" appears, no print jobs can be accepted. Try again when sessions
end. For each command, the amount of possible sessions is indicated as follows:
• lpr: 10
• rcp, rsh: 5
• ftp: 3
• Enter the file name in a format including the path from the directory executing commands.
• The "option" specified in a command is an intrinsic printer option and its syntax is similar to printing
from UNIX. For details, see UNIX Supplement.
Printing Files Directly from Windows
305
To Next Page
Loading...
Need help?
General