For all other security modes and custom settings, no password is required.
For information about each mode, see the manuals provided with the utility.
4. Click [OK].
Close the [Security Mode] dialog box.
• For details about the security mode, see 3Com Bluetooth Connection Manager Help. For details about
the password entry which is required to transmit print jobs, see the following section.
Printing in the Security Mode
This describes how to print in the security mode.
1. Send the print job to the printer in use.
Depending on the computer configuration, the [Connect] dialog box may appear. If it does, use it to
establish the network connection.
The [Authentication] dialog box appears.
2. Enter the Bluetooth password, and then click [OK].
As the Bluetooth password, enter the last four digits of the printer's serial number. You can find the
serial number on the label on the back of the printer. For example, if the serial number is
00A0-001234, the Bluetooth password is 1234.
3. The print job is sent.
• The Bluetooth password differs for each printer and cannot be changed.
1. Preparing for Printing
64
To Next Page
Loading...
Need help?
General