• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• To stop installation of the selected software, click [Cancel] before installation is complete.
• A message appears if there is a newer version of the printer driver already installed. If there is, you
cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add
Printer]. See p.65 "If a Message Appears during Installation".
Installing the PostScript 3 Printer Driver (Windows 95/98/Me)
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local Printer], and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
7. Select the name of the printer whose driver you want to install, and then click [Next >].
8. In the [Available ports:] box, click [Printer Port], and then click [Next >].
9. Change the printer name if you want, and then click [Next>].
Select the Yes check box to configure the printer as default.
10. Specify whether or not to print a test page, and then click [Finish].
11. Restart the computer to complete installation.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
Printing with Parallel Connection
59
To Next Page
Loading...
Need help?
General