Ricoh Aficio SP C811DN User Manual

Interface priority configuration
msh> dhcp priority "interface_name"
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
DNS server address selection
msh> dhcp dnsaddr {dhcp | static}
• Specify whether to obtain the DNS server address from the DHCP server or use the address set
by a user.
• To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set
by a user, specify "static".
Domain name selection
msh> dhcp domainname {dhcp | static}
• Specify whether to obtain the domain name from the DNS server or use the domain name set
by a user.
• To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set
by a user, specify "static".
diprint
The direct printing port enables direct printing from a network-connected computer.
Use the "diprint" command to change direct printing port settings.
View settings
The following command displays the current direct printing port settings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect on
con multi
apl async
• The "port" specifies the port number of the direct printing port.
• The "bidirect" setting indicates whether the direct printing port is bidirectional or not.
Setting timeout
msh> diprint timeout [30~65535]
• You can specify the timeout interval to use when the printer is expecting data from the network.
6. Monitoring and Configuring the Printer
232
6

Ricoh Aficio SP C811DN Specifications

General

Brand	Ricoh
Model	Aficio SP C811DN
Category	Printer
Language	English