• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want to log on to. Use up
to 32 alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context. Use up to 127 char-
acters.
• Operation Mode: Specify whether to use the interface board as a print server or a remote printer.
• Remote Printer No.: This item is effective when the interface board is specified as a remote printer.
Enter the same number as the number of the printer to be created on the print server (0 to 254
characters).
• Job Timeout: When the interface board is used as a NetWare remote printer, the printer cannot
detect when a print job ends. Therefore, the printer terminates printing when a certain period of
time has elapsed since it last received print data (i.e., when it has not received print data for a
certain period of time). Specify here this period of time (3 to 255 seconds). The initial value is
15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down menu.
• NCP Delivery Protocol: Select the protocol for NCP delivery.
5. Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web Image Monitor.
6. Click [Logout].
• To check that the configuration is made correctly, enter the following from the command prompt.
F:> NLIST USER/A/B
• If the printer works as configured, the name of the print server appears as a connected user.
• If you cannot identify the printer you want to configure, check the printer name with the config-
uration page printed from the printer. For details about printing a configuration page, see p.
170 "List/Test Print Menu" .
• If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and
printer. Use the [Network] dialog box of Windows to change the frame type of the computer.
Using Pure IP in the NetWare 5/5.1 or 6/6.5 Environment
Follow the procedure below to connect the printer as a print server in a pure IP environment of NetWare
5/5.1.
• When creating a queued print server in a pure IP environment of NetWare 5/5.1 or NetWare 6.0,
create a print queue on the file server using NetWare Administrator.
7. Using a Printer Server
296
To Next Page
Loading...
Need help?
General