prnlog
Use the "prnlog" command to obtain printer log information.
Print logs display
msh> prnlog
• Displays 16 previous print jobs.
msh> prnlog "ID Number"
• Specify the ID number of the displayed print log information to display additional details about
a print job.
• For details about displayed contents, see p.260 "Getting Printer Information over the Network" .
route
Use the "route" command to view and control the routing table.
All route information display
msh> route get "destination"
• Specify the IPv4 address to destination.
"0.0.0.0" cannot be specified as destination address.
Enabling/disabling Specified IPv4 Destination
msh> route active {host|net} "destination" {on | off}
• You can turn the specified destination on or off. Host becomes the default setting.
Adding IPv4 Routing Table
msh> route add {host|net} "destination" "gateway"
• Adds a host or network route to "destination", and a gateway address to "gateway" in the table.
• Specify the IPv4 address to destination and gateway.
• Host becomes the default setting.
Setting Default IPv4 Gateway
msh> route add default gateway
Deleting specified IPv4 destination from Routing Table
msh> route delete {host|net} "destination"
• Host becomes the default setting.
• IPv4 address of destination can be specified.
Remote Maintenance by telnet
241
To Next Page
Loading...
Need help?
General