Security Options Menu
The System Menu allows you to set conditions for printing.
Changing the Security Options menu
Follow the procedure below to erase data inside memory.
• This setting appears only when the optional security card is installed.
1. Press the [Menu] key.
The menu screen appears.
2. Press [ ] or [ ] key to display [Security Options], and then press the [OK] key.
3. Press [ ] or [ ] key to display [Extended Security], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Erase All Memory], and then enter the [OK] key.
5. Press the [ ] or [ ] key to select the erase method, and then press the [OK] key.
When you select [Random Numbers], enter overwrite times.
All memories will be erased.
6. When the confirmation screen appears, press the [Exit] key.
7. Turn off the power of the printer.
Security Options menu parameters
This section explains about parameters that can be set on the security options menu.
Extended Security
Depending on the setting of the printer, some of the settings listed below may not appear.
Security Options Menu
187
To Next Page
Loading...
Need help?
General