2. Enter a login user name and pass word, and then click [Login].
For details about the login user name and password, consult your network administrator.
• For user code authentication, enter a user code in [User Name], and then click [OK].
• The procedure may differ depending on the Web browser used.
Log Off (using Web Image Monitor)
Follow the procedure below to log on when user authentication is set.
Click [Logout] to log off.
• After you log on and change configurations, make sure to always log off..
About Menu and Mode
There are two modes available with Web Image Monitor: guest mode and administrator mode.
Displayed items may differ depending on the printers.
About Guest Mode
In the guest mode, printer status, settings, and print job status can be viewed, but the printer settings
cannot be changed.
1. Home
The [Status], [Device Info], and [Counter] tab are displayed. Details of the tab menu are displayed on the work
area.
2. Printer: Print Jobs
Allows you to display list of Sample Print, Locked Print, Hold Print, and Stored Print jobs.
6. Monitoring and Configuring the Printer
202
To Next Page
Loading...
Need help?
General