domainname
Use the "domainname" command to display or configure the domain name settings.
You can configure the Ethernet interface or IEEE 802.11b interface.
View settings
The following command displays the current domain name:
msh> domainname
Interface domain configuration
msh> domainname "interface_name"
Setting the Domain Name
msh> domainname "interface_name" name "domain name"
• A domain name can be entered using up to 63 alphanumeric characters.
• The Ethernet interface and IEEE 802.11b interface will have the same domain name.
• wlan can be specified only when the IEEE 802.11b interface unit is installed.
Interface Interface set
ether Ethernet interface
wlan IEEE 802.11b interface
Deleting the Domain Name
msh> domainname "interface_name" clear "name"
help
Use the "help" command to display the available command list and the procedures for using those com-
mands.
Command list display
msh> help
Display of procedure for using commands
msh> help "command_name"
hostname
Use the "hostname" command to change the printer name.
Remote Maintenance by telnet
235
To Next Page
Loading...
Need help?
General