Roland FA-06 Parameter Guide

105
MFX Parameters
35: Modulation Delay
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
When Feedback Mode is CROSS:
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
Parameter Value Explanation
Delay Left
0–1300 ms, note
Adjusts the time until the delay sound
is heard.
Delay Right
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound
is fed back into the eect (See the
gures.)
Feedback # -98–+98 %
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative (-) value invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you don’t want to lter out any
high frequencies, set this parameter
to BYPASS.
Rate #
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
36: 3Tap Pan Delay
Produces three delay sounds; center, left and right.
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
Parameter Value Explanation
Delay Left/
Right/Center
0–2600 ms,
note
Adjusts the time until the delay sound is
heard.
Center
Feedback #
-98–+98 %
Adjusts the amount of the delay sound
that’s fed back into the eect. Negative (-)
value invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the eect is ltered out. If
you do not want to lter out any high
frequencies, set this parameter to BYPASS.
Left/Right/
Center Level
0–127 Volume of each delay
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127 Output Level
37: 4Tap Pan Delay
This eect has four delays.
L in
R in
L out
R out
Quadruple Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
2 3
4
L
R
Parameter Value Explanation
Delay 1–4
Time
0–2600 ms,
note
Adjusts the time until the delay sound is
heard.
Delay 1
Feedback #
-98–+98 %
Adjusts the amount of the delay sound
that’s fed back into the eect. Negative (-)
value invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the eect is ltered out. If
you do not want to lter out any high
frequencies, set this parameter to BYPASS.
Delay 1–4
Level
0–127 Volume of each delay
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127 Output Level

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g