Roland FA-06 Parameter Guide

PCM Drum Kit (PCMD)
65
Parameter Value Explanation
Cuto V-Curve FIXED, 1–7
Selects one of the following seven curves that determine how keyboard playing dynamics
(velocity) inuence the cuto frequency. Set this to “FIXED” if you don’t want the Cuto frequency
to be aected by the keyboard velocity.
1 2 3 4 5 6 7
Cuto V-Sens -63–+63
Use this parameter when changing the cuto frequency to be applied as a result of changes in
playing velocity. If you want strongly played notes to raise the cuto frequency, set this parameter
to positive (+) value. If you want strongly played notes to lower the cuto frequency, use negative
(-) value.
Resonance V-Sens -63–+63
This allows keyboard velocity to modify the amount of Resonance. If you want strongly played
notes to have a greater Resonance eect, set this parameter to positive (+) value. If you want
strongly played notes to have less Resonance, use negative (-) value.
TVF Env V-Curve FIXED, 1–7
Selects one of the following 7 curves that will determine how keyboard playing dynamics will
aect the TVF envelope. Set this to “FIXED” if you don’t want the TVF Envelope to be aected by
the keyboard velocity.
1 2 3 4 5 6 7
TVF Env V-Sens -63–+63
Species how keyboard playing dynamics will aect the depth of the TVF envelope. Positive (+)
value will cause the TVF envelope to have a greater eect for strongly played notes, and negative
(-) settings will cause the eect to be less.
TVF Env T1 V-Sens -63–+63
This allows keyboard dynamics to aect the Time 1 of the TVF envelope. If you want Time 1 to be
speeded up for strongly played notes, set this parameter to a positive (+) value. If you want it to be
slowed down, set this to a negative (-) value.
TVF Env T4 V-Sens -63–+63
The parameter to use when you want key release speed to control the Time 4 value of the TVF
envelope. If you want Time 4 to be speeded up for quickly released notes, set this parameter to a
positive (+) value. If you want it to be slowed down, set this to a negative (-) value.
TVF Env tab
TVF Env Depth -63–+63
Species the depth of the TVF envelope. Higher settings will cause the TVF envelope to produce
greater change. Negative (-) value will invert the shape of the envelope.
TVF Env Time 1–4 0–127
Specify the TVF envelope times (Time 1–Time 4). Higher settings will lengthen the time until the
next cuto frequency level is reached (For example, Time 2 is the time over which Level 1 will
change to Level 2.).
TVF Env Level 0-4 0–127
Specify the TVF envelope levels (Level 0–Level 4). These settings specify how the cuto frequency
will change at each point, relative to the standard cuto frequency (the cuto frequency value
specied in the TVF screen).
T1 T2 T3 T4
L3
L0
L2L1 L4
Note o
Cuto
Frequency
Time
Note on
T: Time L: Level
TVA tab
Partial Level 0–127
Sets the volume of the drum partial. Use this parameter to adjust the volume balance between
drum partials.
MEMO
The volume levels of the Waves from which the drum partial is composed is set with the Wave
Level parameter (p. 62).
Level V-Curve FIXED, 1–7
You can select from seven curves that determine how keyboard playing strength will aect the
volume. If you do not want the volume of the drum partial to be aected by the force with which
you press the key, select “FIXED.”
1 2 3 4 5 6 7

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g