IFX Parameters
83
Parameter Value Explanation
Delay Left
0–1300 msec,
note
Adjusts the time until the delay sound
is heard.
Delay Right
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound
is fed back into the eect
(See the gures.)
Feedback -98–+98 %
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative (-) settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you don’t want to lter out any
high frequencies, set this parameter
to BYPASS.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
47: 3Tap Pan Delay
Produces three delay sounds; center, left and right.
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Feedback
Center Tap
Parameter Value Explanation
Delay Left/Right/
Center
0–2600 msec,
note
Adjusts the time from the original
sound until the left, right, and center
delayed sounds are heard
Center Feedback -98–+98 %
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative (-) settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you do not want to lter out any
high frequencies, set this parameter
to BYPASS.
Left/Right/
Center Level
0–127 Volume of each delay
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
48: 4Tap Pan Delay
This eect has four delays.
L in
R in
L out
R out
Quadruple
Tap Delay
Balance W
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
2-Band
EQ
2-Band
EQ
Stereo location of each delay
1
2 3
4
L
R
Parameter Value Explanation
Delay 1-4 Time
0–2600 msec,
note
Adjusts the time from the original
sound until delay sounds 1–4 are
heard
Delay 1
Feedback
-98–+98 %
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative (-) settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you do not want to lter out any
high frequencies, set this parameter
to BYPASS.
Delay 1-4 Level 0–127 Volume of each delay
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
49: Multi Tap Delay
This eect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can
also set the panning and level of each delay sound.
L in
R in
L out
R out
Multi Tap Delay
Balance W
Balance W
Balance D
Delay 1
Delay 3
Delay 4
Delay 2
Feed
back
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Delay 1-4 Time
0–2600 msec,
note
Adjusts the time until Delays 1–4 are
heard.
Delay 1
Feedback
-98–+98 %
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative (-) settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you don’t want to lter out
any the high frequencies, set this
parameter to BYPASS.
Delay 1-4 Pan L64–63R Stereo location of Delays 1–4
Delay 1-4 Level 0–127 Output level of Delays 1–4
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range