Roland FA-06 Parameter Guide

IFX Parameters
86
56: Lo Noise
In addition to a lo- eect, this adds various types of noise such as
white noise and disc noise.
R in
R out
L in
L out
Lo-Fi
Lo-Fi
Noise Gen.
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
LoFi Type 1–9
Degrades the sound quality. The
sound quality grows poorer as this
value is increased.
Post Filter Type
Type of lter that follows the LoFi eect
OFF No lter is used
LPF
Cuts the frequency range above the
Cuto.
HPF
Cuts the frequency range below the
Cuto.
Post Filter Cuto 200–8000 Hz Center frequency of the lter
W/P Noise Type WHITE, PINK
Switch between white noise and pink
noise.
W/P Noise LPF
200–8000 Hz,
BYPASS
Center frequency of the low pass
lter applied to the white/pink noise
(BYPASS: no cut)
W/P Noise Level 0–127 Volume of the white/pink noise
Disc Noise Type LP, EP, SP, RND
Type of record noise
The frequency at which the noise is
heard depends on the selected type.
Disc Noise LPF
200–8000 Hz,
BYPASS
Adjusts the cuto frequency of the
low pass lter applied to the record
noise. If you don’t want to lter
out any high frequencies, set this
parameter to BYPASS.
Disc Noise Level 0–127 Volume of the record noise
Hum Noise Type 50 Hz, 60 Hz Frequency of the hum noise
Hum Noise LPF
200–8000 Hz,
BYPASS
Center frequency of the low pass lter
applied to the hum noise (BYPASS:
no cut)
Hum Noise Level 0–127 Volume of the hum noise
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the eect sound (W)
Level 0–127 Output Level
57: Lo Compress
This is an eect that intentionally degrades the sound quality for
creative purposes.
L in
R in
L out
R out
Compressor
Lo-Fi
Lo-Fi
Compressor
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Pre Filter Type
Selects the type of lter applied to the sound before it
passes through the Lo-Fi eect.
1 Compressor o
2–6 Compressor on
LoFi Type 1–9
Degrades the sound quality. The
sound quality grows poorer as this
value is increased.
Post Filter Type
Type of lter
OFF No lter is used
LPF
Cuts the frequency range above the
Cuto
HPF
Cuts the frequency range below the
Cuto
Post Filter Cuto 200–8000 Hz Basic frequency of the Post Filter
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the eect sound (W)
Level 0–127 Output Level
58: Lo Radio
In addition to a Lo-Fi eect, this eect also generates radio noise.
R in
R out
L in
L out
Lo-Fi
Lo-Fi
Radio
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
LoFi Type 1–9
Degrades the sound quality. The
sound quality grows poorer as this
value is increased.
Post Filter Type
Type of lter
OFF No lter is used
LPF
Cuts the frequency range above the
Cuto.
HPF
Cuts the frequency range below the
Cuto.
Post Filter Cuto 200–8000 Hz Basic frequency of the Post Filter
Radio Detune 0–127
Simulates the tuning noise of a radio.
As this value is raised, the tuning drifts
further.
Radio Noise
Level
0–127 Volume of the radio noise
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the eect sound (W)
Level 0–127 Output Level

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g