Roland FA-06 Parameter Guide

IFX Parameters
78
29: 3D Chorus
This applies a 3D eect to the chorus sound. The chorus sound will
be positioned 90 degrees left and 90 degrees right.
L
R
3D Chorus
2-Band
EQ
2-Band
EQ
R out
L out
Parameter Value Explanation
Filter Type
Type of lter
OFF No lter is used
LPF
Cuts the frequency range above the
Cuto Freq
HPF
Cuts the frequency range below the
Cuto Freq
Cuto Freq 200–8000 Hz
Center frequency when using the lter
to cut a specic frequency range
Pre Delay 0.0–100 msec
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Modulation depth of the chorus eect
Phase 0–180 deg Spatial spread of the sound
Output Mode
The optimal 3D eect will be achieved.
Speaker When using speakers
Phones When using headphones
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the chorus sound (W)
Level 0–127 Output Level
30: 3D Flanger
This applies a 3D eect to the anger sound. The anger sound will
be positioned 90 degrees left and 90 degrees right.
L
R
3D Flanger
2-Band
EQ
2-Band
EQ
R out
L out
Parameter Value Explanation
Filter Type
Type of lter
OFF No lter is used
LPF
Cuts the frequency range above the
Cuto Freq
HPF
Cuts the frequency range below the
Cuto Freq
Cuto Freq 200–8000 Hz
Center frequency when using the lter
to cut a specic frequency range
Pre Delay 0.0–100 msec
Adjusts the delay time from when the
direct sound begins until the anger
sound is heard.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Feedback -98–+98 %
Adjusts the proportion of the anger
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Parameter Value Explanation
Output Mode
The optimal 3D eect will be achieved.
Speaker When using speakers
Phones When using headphones
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the anger sound (W)
Level 0–127 Output Level
31: 3D Step Flanger
This applies a 3D eect to the step anger sound. The anger sound
will be positioned 90 degrees left and 90 degrees right.
L
R
3D Step Flanger
2-Band
EQ
2-Band
EQ
R out
L out
Parameter Value Explanation
Filter Type
Type of lter
OFF No lter is used
LPF
Cuts the frequency range above the
Cuto Freq
HPF
Cuts the frequency range below the
Cuto Freq
Cuto Freq 200–8000 Hz
Center frequency when using the lter
to cut a specic frequency range
Pre Delay 0.0–100 msec
Adjusts the delay time from when the
direct sound begins until the anger
sound is heard.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Feedback -98–+98 %
Adjusts the proportion of the anger
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Step Rate
0.10–20.00 Hz,
note
Rate (period) of pitch change
Output Mode
The optimal 3D eect will be achieved.
Speaker When using speakers
Phones When using headphones
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the anger sound (W)
Level 0–127 Output Level

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g