IFX Parameters
79
32: 2 Band Chorus
A chorus eect that lets you apply an eect independently to the
low-frequency and high-frequency ranges.
R in
R out
L out
Split
High Band Chorus
Low Band Chorus
High Band Chorus
Low Band Chorus
Split
Parameter Value Explanation
Split Freq 200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100 msec
Delay time from when the original
sound is heard to when the low-range
chorus sound is heard
Low Rate
0.05–10.00 Hz,
note
Rate at which the low-range chorus
sound is modulated
Low Depth 0–127
Modulation depth for the low-range
chorus sound
Low Phase 0–180 deg
Spaciousness of the low-range chorus
sound
High Pre Delay 0.0–100 msec
Delay time from when the original
sound is heard to when the high-
range chorus sound is heard
High Rate
0.05–10.00 Hz,
note
Rate at which the low-range chorus
sound is modulated
High Depth 0–127
Modulation depth for the high-range
chorus sound
High Phase 0–180 deg
Spaciousness of the high-range
chorus sound
Balance
D100:0W–
D0:100W
Volume balance of the original sound
(D) and chorus sound (W)
Level 0–127 Output Level
33: 2 Band Flanger
A anger that lets you apply an eect independently to the
low-frequency and high-frequency ranges.
R in
R out
Split
High Band Flanger
Low Band Flanger
High Band Flanger
Low Band Flanger
Split
Low Band Feedback
High Band Feedback
High Band Feedback
Low Band Feedback
Parameter Value Explanation
Split Freq 200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100 msec
Delay time from when the original
sound is heard to when the low-range
anger sound is heard
Low Rate
0.05–10.00 Hz,
note
Rate at which the low-range anger
sound is modulated
Low Depth 0–127
Modulation depth for the low-range
anger sound
Low Phase 0–180 deg
Spaciousness of the low-range anger
sound
Parameter Value Explanation
Low Feedback -98–+98 %
Proportion of the low-range anger
sound that is to be returned to the
input (negative (-) values invert the
phase)
High Pre Delay 0.0–100 msec
Delay time from when the original
sound is heard to when the high-
range anger sound is heard
High Rate
0.05–10.00 Hz,
note
Rate at which the high-range anger
sound is modulated
High Depth 0–127
Modulation depth for the high-range
anger sound
High Phase 0–180 deg
Spaciousness of the high-range
anger sound
High Feedback -98–+98 %
Proportion of the high-range anger
sound that is to be returned to the
input (negative (-) values invert the
phase)
Balance
D100:0W–
D0:100W
Volume balance of the original sound
(D) and anger sound (W)
Level 0–127 Output Level
34: 2 Band Step Flanger
A step anger that lets you apply an eect independently to the
low-frequency and high-frequency ranges.
R in
R out
Split
High Band Step Flanger
Split
Low Band Feedback
High Band Feedback
High Band Feedback
Low Band Feedback
Low Band Step Flanger
High Band Step Flanger
Low Band Step Flanger
Parameter Value Explanation
Split Freq 200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100 msec
Delay time from when the original
sound is heard to when the low-range
anger sound is heard
Low Rate
0.05–10.00 Hz,
note
Rate at which the low-range anger
sound is modulated
Low Depth 0–127
Modulation depth for the low-range
anger sound
Low Phase 0–180 deg
Spaciousness of the low-range anger
sound
Low Feedback -98–+98 %
Proportion of the low-range anger
sound that is to be returned to the
input (negative (-) values invert the
phase)
Low Step Rate
0.10–20.00 Hz,
note
Rate at which the steps will cycle for
the low-range anger sound
High Pre Delay 0.0–100 msec
Delay time from when the original
sound is heard to when the high-
range anger sound is heard
High Rate
0.05–10.00 Hz,
note
Rate at which the high-range anger
sound is modulated
High Depth 0–127
Modulation depth for the high-range
anger sound
High Phase 0–180 deg
Spaciousness of the high-range
anger sound