Roland FA-06 Parameter Guide

Studio Set
9
PART VIEW
1. Press the [MENU] button.
2. Move the cursor to “Part View” and press the [ENTER] button.
The PART VIEW screen appears.
Parameter Value Explanation
Level/Pan tab
Type (Tone Type)
SN-A,
SN-S,
SN-D,
PCMS,
PCMD
Species the type of tone/drum kit assigned to each part.
SN-A: SuperNATURAL Acoustic Tones
SN-S: SuperNATURAL Synth Tones
SN-D: SuperNATURAL Drum Kits
PCMS: PCM Synth Tones
PCMD: PCM Drum Kits
Bank (Tone Bank)
PRST,
USER,
GM2
Selects the group of the tone/drum kit assigned to each part.
* You can select “GM2” if the tone type is PCMS or PCMD.
Number (Tone Number) 001– Selects the number of the tone/drum kit assigned to each part.
Mute OFF, ON
Species whether each part’s performance is temporarily muted (ON) or not muted (OFF).
* The Mute parameter does not turn the part o; it mutes the sound by minimizing the volume.
Therefore, the part still receives MIDI messages.
Solo OFF, ON Only the sound of the soloed part is heard.
Level 0–127
Adjust the volume of each part.
This setting’s main purpose is to adjust the volume balance between parts.
Pan L64–63R
Adjust the pan of each part.
“L64” is far left, “0” is center, and “63R” is far right.
Sw (Rx Switch) OFF, ON
For each part, specify whether MIDI messages will be received (ON), or not (OFF).
If this is “OFF,” the part will not respond. Normally, you should leave this “ON,” but you can turn it
“OFF” when you do not want a specic part to be playing during song playback.
Ch (Rx Channel) 1–16 Species the MIDI receive channel for each part.
Keyboard tab
Kbd (Keyboard Switch) OFF, ON
Turns each part’s keyboard switch on/o.
* You can’t change this setting if the Keyboard Mode is “SINGLE,” “SPLIT,” or “DUAL.”
Arp (Arpeggio Switch) OFF, ON
Turns each part’s arpeggio switch on/o.
* You can’t change this setting if the Keyboard Mode is “SINGLE.”
R.L (Keyboard Range Lower) C-–G9
Species the lowest key of the keyboard range for each part.
* You can’t change this setting if the Keyboard Mode is “SINGLE,” “SPLIT,” or “DUAL.”
R.U (Keyboard Range Upper) C-–G9
Species the highest key of the keyboard range for each part.
* You can’t change this setting if the Keyboard Mode is “SINGLE,” “SPLIT,” or “DUAL.”
NOTE
If you raise the lowest key above the highest key, or the highest key below the lowest key, the
other setting will change to the same value.

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g