Roland FA-06 Parameter Guide

107
MFX Parameters
40: Time Ctrl Delay
A stereo delay in which the delay time can be varied smoothly.
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance W
Time Ctrl Delay
Time Ctrl Delay
2-Band EQ
2-Band EQ
Balance D
Balance D
Parameter Value Explanation
Delay Time # 0–1300 ms, note
Adjusts the time until the delay is
heard.
Acceleration 0–15
Adjusts the speed which the Delay
Time changes from the current setting
to a specied new setting.
The rate of change for the Delay
Time directly aects the rate of pitch
change.
Feedback # -98–+98 %
Adjusts the amount of the delay that’s
fed back into the eect. Negative (-)
value invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you do not want to lter out any
high frequencies, set this parameter
to BYPASS.
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
41: LOFI Compress
This is an eect that intentionally degrades the sound quality for
creative purposes.
L in
R in
L out
R out
Compressor
Lo-Fi
Lo-Fi
Compressor
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Pre Filt Type 1–6
Selects the type of lter applied to the
sound before it passes through the
Lo-Fi eect.
1: Compressor o
2–6: Compressor on
LoFi Type 1–9
Degrades the sound quality. The
sound quality grows poorer as this
value is increased.
PostFilt Type OFF, LPF, HPF
Type of lter
OFF: no lter is used
LPF: cuts the frequency range above
the Cuto
HPF: cuts the frequency range below
the Cuto
PostFilt Cof 200–8000 Hz Basic frequency of the Post Filter
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the eect sound (W)
Level # 0–127 Output Level
42: Bit Crusher
This creates a lo- sound.
L in
R in
L out
R out
Bit Crusher
2-Band EQ
2-Band EQ
Bit Crusher
Parameter Value Explanation
Sample Rate # 0–127 Adjusts the sample rate.
Bit Down # 0–20 Adjusts the bit depth.
Filter # 0–127 Adjusts the lter depth.
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Level 0–127 Output Level
43: Pitch Shifter
A stereo pitch shifter.
L in
R in
Pitch Shifter
Pitch Shifter
L out
R out
2-Band EQ
2-Band EQ
Parameter Value Explanation
Coarse #1 -24–+12 semi
Adjusts the pitch of the pitch shifted
sound in semitone steps.
Fine #1 -100–+100 cent
Adjusts the pitch of the pitch shifted
sound in 2-cent steps.
Delay Time 0–1300 ms, note
Adjusts the delay time from the direct
sound until the pitch shifted sound
is heard.
Feedback # -98–+98 %
Adjusts the proportion of the pitch
shifted sound that is fed back into the
eect. Negative (-) value will invert
the phase.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the pitch shifted sound
(W)
Level 0–127 Output Level

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g