Studio Set
12
Parameter Value Explanation
Vibrato tab
Rate (Vibrato Rate)
-64–+63
For each part, adjust the vibrato speed (the rate at which the pitch is modulated). The pitch will be
modulated more rapidly for higher settings, and more slowly with lower settings.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü ü
–
ü ü
Depth (Vibrato Depth)
-64–+63
For each part, this adjusts the depth of the vibrato eect (the depth at which the pitch is
modulated). The pitch will be modulated more greatly for higher settings, and less with lower
settings.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü ü
–
ü ü
Delay (Vibrato Delay) -64–+63
For each part, this adjusts the time delay until the vibrato (pitch modulation) eect begins. Higher
settings will produce a longer delay time before vibrato begins, while lower settings produce a
shorter time.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü ü
–
ü ü
Oset tab
Cuto (Cuto Oset) -64–+63
Adjusts the cuto frequency for the tone/drum kit assigned to a part.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü* ü
–
ü ü
* For some tones, the eect may be dicult to notice.
Reso (Resonance Oset) -64–+63
Adjusts the Resonance for the tone/drum kit assigned to a part.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü* ü
–
ü ü
* For some tones, the eect may be dicult to notice.
Attack (Attack Time Oset) -64–+63
Adjusts the Attack Time for the tone/drum kit assigned to a part.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü ü
–
ü ü
Decay (Decay Time Oset) -64–+63
Adjusts the Decay Time for the tone/drum kit assigned to a part.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– – –
ü ü ü ü
Release (Release Time Oset) -64–+63
Adjusts the Release Time for the tone/drum kit assigned to a part.
SN-A
(Ac. Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü ü ü ü ü