IFX Parameters
90
71: Distortion g Delay
The parameters are essentially the same as in “68: Overdrive g
Delay,” with the exception of the following two.
Overdrive Drive g Distortion Drive,
Overdrive Pan g Distortion Pan
L in
R in
Delay
Distortion
R out
Balance W
Balance W
Balance D
Balance D
Feedback
72: Enhancer g Chorus
Chorus
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Enhancer Sens 0–127 Sensitivity of the enhancer
Enhancer Mix 0–127
Level of the overtones generated by
the enhancer
Chorus Pre Delay 0.0–100 msec
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Chorus Rate
0.05–10.00 Hz,
note
Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus Balance
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Level 0–127 Output Level
73: Enhancer g Flanger
Feedback
Flanger
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Parameter Value Explanation
Enhancer Sens 0–127 Sensitivity of the enhancer
Enhancer Mix 0–127
Level of the overtones generated by
the enhancer
Flanger Pre
Delay
0.0–100 msec
Adjusts the delay time from when the
direct sound begins until the anger
sound is heard.
Flanger Rate
0.05–10.00 Hz,
note
Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger
Feedback
-98–+98 %
Adjusts the proportion of the anger
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Flanger Balance
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
anger (W) and the sound that is not
sent through the anger (D).
Level 0–127 Output Level
74: Enhancer g Delay
Feedback
Delay
R in
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Enhancer Sens 0–127 Sensitivity of the enhancer
Enhancer Mix 0–127
Level of the overtones generated by
the enhancer
Delay Time
0–2600 msec,
note
Adjusts the delay time from the direct
sound until the delay sound is heard.
Delay Feedback -98–+98 %
Adjusts the proportion of the delay
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
BYPASS.
Delay Balance
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Level 0–127 Output Level
75: Chorus g Delay
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Parameter Value Explanation
Chorus Pre Delay 0.0–100 msec
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Chorus Rate
0.05–10.00 Hz,
note
Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus Balance
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the chorus sound (W)
Delay Time
0–2600 msec,
note
Adjusts the delay time from the direct
sound until the delay sound is heard.
Delay Feedback -98–+98 %
Adjusts the proportion of the delay
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
BYPASS.
Delay Balance
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Level 0–127 Output Level