Roland FA-06 Parameter Guide

106
MFX Parameters
38: Multi Tap Delay
This eect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can
also set the panning and level of each delay sound.
L in
R in
L out
R out
Multi Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 3
Delay 4
Delay 2
Feed
back
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Delay 1–4 Time 0–2600 ms, note
Adjusts the time until Delays 1–4 are
heard.
Delay 1
Feedback #
-98–+98 %
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative (-) value invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out. If you don’t want to lter out
any the high frequencies, set this
parameter to BYPASS.
Delay 1–4 Pan L64–63R Stereo location of Delays 1–4
Delay 1–4 Level 0–127 Output level of Delays 1–4
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the eect sound (W)
Level 0–127 Output Level
39: Reverse Delay
This is a reverse delay that adds a reversed and delayed sound to the
input sound. A tap delay is connected immediately after the reverse
delay.
Feedback
L in
R in
Rev. Delay
L out
R out
2-Band
EQ
2-Band
EQ
Rev
Delay
D2
D1
D3
Parameter Value Explanation
Threshold 0–127
Volume at which the reverse delay will
begin to be applied
Rev Delay Tme 0–1300 ms, note
Delay time from when sound is input
into the reverse delay until the delay
sound is heard
Rev Delay
Feedback #
-98–+98 %
Proportion of the delay sound that
is to be returned to the input of the
reverse delay (negative (-) values
invert the phase)
Rev Delay HF
Damp
200–8000 Hz,
BYPASS
Frequency at which the high-
frequency content of the reverse-
delayed sound will be cut (BYPASS:
no cut)
Rev Delay Pan L64–63R Panning of the reverse delay sound
Rev Delay Level 0–127 Volume of the reverse delay sound
Delay 1–3 Time 0–1300 ms, note
Delay time from when sound is input
into the tap delay until the delay
sound is heard
Delay 3
Feedback #
-98–+98 %
Proportion of the delay sound that
is to be returned to the input of the
tap delay (negative (-) values invert
the phase)
Delay HF Damp
200–8000 Hz,
BYPASS
Frequency at which the low-frequency
content of the tap delay sound will
be cut
(BYPASS: no cut)
Delay 1 Pan,
Delay 2 Pan
L64–63R Panning of the tap delay sounds
Delay 1 Level,
Delay 2 Level
0–127 Volume of the tap delay sounds
Low Gain -15–+15 dB
Amount of boost/cut for the
low-frequency range
High Gain -15–+15 dB
Amount of boost/cut for the
high-frequency range
Balance #
D100:0W–
D0:100W
Volume balance of the original sound
(D) and delay sound (W)
Level 0–127 Output Level

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g