Roland FA-06 Parameter Guide

Studio Set
6
Parameter Value Explanation
Pedal tab
Pedal Assign Source (System) SYSTEM, STUDIO
Species whether the functions controlled by the pedals connected to the FOOT PEDAL CTRL
1 and 2 jacks will be determined by the system settings (SYSTEM) or by the studio set settings
(STUDIO).
* Pedal Assign Source (System) is a system parameter.
* If you choose “SYSTEM,” the settings of the studio set parameters Pedal 1/2 Assign are ignored.
Pedal 1 Assign
Pedal 2 Assign
Specify the functions that are controlled by pedals connected to the FOOT PEDAL CTRL 1 and 2 jacks.
OFF No function is assigned.
CC01–31, 32 (OFF), 33–95 Controller number 1–31, 32, 33–95
BEND DOWN The same eect as moving the pitch bend lever to the left.
BEND UP The same eect as moving the pitch bend lever to the right.
AFTERTOUCH Aftertouch
S1/S2 tab
S1/S2 Assign Source (System) SYSTEM, STUDIO
Species whether the functions controlled by the [S1] [S2] buttons will be determined by the
system settings (SYSTEM) or by the studio set settings (STUDIO).
* S1/S2 Assign Source (System) is a system parameter.
* If you choose “SYSTEM,” the settings of the studio set parameters Switch S1/S2 Assign and
Switch S1/S2 Assign Mode are ignored.
Assignable
Switch S1 Assign
Switch S2 Assign
Specify the functions that are controlled by the [S1] [S2] buttons.
Some of the SuperNATURAL acoustic tones let you use control changes to modify the character of the sound or switch to other variation
sounds. For details, refer to “SuperNATURAL Tone CC Assign” (p. 118).
*1: The Switch S1/2 Assign setting is xed at “LATCH.”
OFF No function is assigned.
CC01–31, 32 (OFF), 33–95
Controller number 1–31, 32, 33–95
CC16 (General-1)–CC19 (General-4) and CC80 (General-5)–CC83 (General-8) apply specic eects if
a SuperNATURAL acoustic tone is selected (p. 118).
AFTERTOUCH Aftertouch
MONO/POLY Switch between mono/poly.
CHORUS SWITCH *1 Turn the chorus on/o.
REVERB SWITCH *1 Turn the reverb on/o.
MASTER EQ SWITCH *1 Turn the master EQ on/o.
TFX SWITCH *1 Turn the total eect on/o.
MASTER KEY DOWN *1 Lower the keyboard range by a semitone.
MASTER KEY UP *1 Raise the keyboard range by a semitone.
Switch S1 Mode
Switch S2 Mode
LATCH The setting is turned on/o each time you press the button.
MOMENTARY
The setting is turned on while you hold down the button, and turned o when you release the
button.
Knob tab
Knob Assign Source (System) SYSTEM, STUDIO
Species whether the functions controlled by the SOUND MODIFY knobs will be determined by
the system settings (SYSTEM) or by the studio set settings (STUDIO).
* Knob Assign Source (System) is a system parameter.
* If you choose “SYSTEM,” the settings of the studio set parameters Sound Modify Knob 1–6
Assign are ignored.
Sound Modify Knob 1–6 Assign
Specify the functions that are controlled by the SOUND MODIFY knobs.
OFF No function is assigned.
CC01–31, 32 (OFF), 33–95
Controller number 1–31, 32, 33–95
CC16 (General-1)–CC19 (General-4) and CC80 (General-5)–CC83 (General-8) apply specic eects if
a SuperNATURAL acoustic tone is selected (p. 118).
PITCH BEND Applies the same eect as when the pitch bend lever is moved.
AFTERTOUCH Aftertouch
TFX PARAM 1–3 Controls parameters 1–3 of the Total Eect.

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g