IFX Parameters
73
11: Phaser
This is a stereo phaser. A phase-shifted sound is added to the original
sound and modulated.
R in
R out
L in
L out
Phaser
Mix
2-Band
EQ
Phaser
2-Band
EQ
Mix
Parameter Value Explanation
Mode
4-STAGE,
8-STAGE,
12-STAGE
Number of stages in the phaser
Manual 0–127
Adjusts the basic frequency from
which the sound will be modulated.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Polarity
Selects whether the left and right phase of the
modulation will be the same or the opposite.
INVERSE
The left and right phase will be
opposite. When using a mono source,
this spreads the sound.
SYNCHRO
The left and right phase will be the
same. Select this when inputting a
stereo source.
Resonance 0–127 Amount of feedback
Cross
Feedback
-98–+98 %
Adjusts the proportion of the phaser
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Mix 0–127 Level of the phase-shifted sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Level 0–127 Output Level
12: Step Phaser
This is a stereo phaser. The phaser eect will be varied gradually.
R in
R out
L in
L out
Step Phaser
Mix
2-Band
EQ
Step Phaser
2-Band
EQ
Mix
Parameter Value Explanation
Mode
4-STAGE,
8-STAGE,
12-STAGE
Number of stages in the phaser
Manual 0–127
Adjusts the basic frequency from
which the sound will be modulated.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Polarity
Selects whether the left and right phase of the
modulation will be the same or the opposite.
INVERSE
The left and right phase will be
opposite. When using a mono source,
this spreads the sound.
SYNCHRO
The left and right phase will be the
same. Select this when inputting a
stereo source.
Parameter Value Explanation
Resonance 0–127 Amount of feedback
Cross
Feedback
-98–+98 %
Adjusts the proportion of the phaser
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
Step Rate
0.10–20.00 Hz,
note
Rate of the step-wise change in the
phaser eect
Mix 0–127 Level of the phase-shifted sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Level 0–127 Output Level
13: Multi Stage Phaser
Extremely high settings of the phase dierence produce a deep
phaser eect.
Resonance
Mix
R in
R out
Pan R
Pan L
2-Band
EQ
Multi Stage
Phaser
Parameter Value Explanation
Mode
4-STAGE,
8-STAGE,
12-STAGE,
16-STAGE,
20-STAGE,
24-STAGE
Number of phaser stages
Manual 0–127
Adjusts the basic frequency from
which the sound will be modulated.
Rate
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Resonance 0–127 Amount of feedback
Mix 0–127 Level of the phase-shifted sound
Pan L64–63R Stereo location of the output sound
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Level 0–127 Output Level
14: Innite Phaser
A phaser that continues raising/lowering the frequency at which the
sound is modulated.
Infinite Phaser 2-Band EQ
R in
R out
Pan R
Pan L
Parameter Value Explanation
Mode 1, 2, 3, 4
Higher values will produce a deeper
phaser eect.
Speed -100–+100
Speed at which to raise or lower
the frequency at which the sound is
modulated (+: upward / -: downward)
Resonance 0–127 Amount of feedback
Mix 0–127 Volume of the phase-shifted sound
Pan L64–63R Panning of the output sound
Low Gain -15–+15 dB
Amount of boost/cut for the
low-frequency range
High Gain -15–+15 dB
Amount of boost/cut for the
high-frequency range
Level 0–127 Output volume