Roland FA-06 Parameter Guide

EFFECTS EDIT
15
STUDIO SET EFFECTS
1. Access the EFFECTS EDIT screen (p. 14).
2. Press the button for the studio set eect that you want to edit.
Button Explanation
[3] (Chorus) Edits the chorus settings.
[4] (Reverb) Edits the reverb settings.
[SHIFT] + [3] (Comp+EQ Output)
Species the output destination of the drum part’s compressor and equalizer.
* This is valid only if the tone of the part specied by Drum Comp+EQ Assign is either PCMD or SN-D.
[SHIFT] + [7] (Master Comp)
Applies a nal adjustment (compression) to the overall sound of the studio set.
* When M.COMP/IFX Select is set to “Master Comp.”
[SHIFT] + [7] (IFX)
Edits the insert eect settings.
* When M.COMP/IFX Select is set to “IFX.”
The STUDIO SET EFFECTS screen appears.
Parameter Value Explanation
Chorus tab
Chorus Switch
([2] (Chorus Sw) button)
OFF, ON Switches the chorus on/o.
Chorus Type
00: OFF
01: Chorus
02: Delay
03: GM2 Chorus
Selects the types of chorus.
Choose “00: OFF” if you don’t want to apply a chorus.
Chorus Parameter -
Edit the parameters for the selected chorus type.
Refer to “Chorus Parameters” (p. 68).
Chorus Level 0–127 Adjusts the volume of the sound that has passed through chorus.
Chorus Output Assign MAIN, SUB
Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select
is set to “MAIN” or “MAIN+REV.”
Chorus Output Select MAIN, REV, MAIN+REV
Species how the sound routed through chorus will be output.
MAIN: Output to the OUTPUT jacks.
REV: Output to the reverb.
MAIN+REV: Output to the OUTPUT jacks and the reverb.
Reverb tab
Reverb Switch
([2] (Reverb Sw) button)
OFF, ON Switches the reverb on/o.
Reverb Type
00: OFF
01: Room 1
02: Room 2
03: Hall 1
04: Hall 2
05: Plate
06: GM2 Reverb
Selects the types of reverb.
Choose “00: OFF” if you don’t want to apply a reverb.
Reverb Parameter -
Edit the parameters for the selected reverb type.
Refer to “Reverb Parameters” (p. 68).
Reverb Level 0–127 Adjusts the volume of the sound that has passed through reverb.
Reverb Output Assign MAIN, SUB
Species how the sound routed through reverb will be output.
The sound is output in stereo from the MAIN OUTPUT jacks, or from the SUB OUTPUT jack.

Roland FA-06 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	61 keys
Display type	LCD
Display diagonal	5 \
Product color	Black
Sound effects	Acoustic resonance, Synthesizer
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	101 mm
Weight	5700 g