112
System settings
System settings
You use the DISPLAY/PANEL screen to adjust the settings of the
panel and display.
1.
Access the SYSTEM screen.
2.
Select “DISPLAY/PANEL“ and press [ENTER].
The DISPLAY/PANEL screen is displayed.
You can make the settings for the following values:
DISPLAY
CONTRAST
This adjusts the contrast of the display.
BRIGHTNESS
This adjusts the brightness of the display.
PANEL
BRIGHTNESS
This adjusts the brightness of the panel buttons and meters.
Use the DATE&TIME popup of the SYSTEM screen to set the date
and time.
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Select “DATE/TIME“ and press [ENTER].
fig.ScrSysDateTimeGuide.eps
The DATE/TIME screen is displayed.
HOUR
This specifies the current hour in a range of 0–23.
MINUTE
This specifies the current minute in a range of 0–59.
SECOND
This specifies the current second in a range of 0–59.
YEAR
This specifies the year in a range of 2000 to 2099.
MONTH
This specifies the month in a range of 1–12.
DATE
This specifies the date in a range of 1–31.
FORMAT
This selects the format of the date.
You can choose one of the following formats:
3.
Use the value dial to set each item.
4.
Pressing SET button to apply the settings.
Adjusting the brightness of the
display and panel
1
2
1
Date&time setting
MM/DD/YYYY
Month/Date/Year
DD/MM/YYYY Date/Month/Year
YYYY/MM/DD Year/Month/Date
1
2
3
4
5
6
7
M-200i_e.book 112 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
