42
AUX, MTX, MAIN operations
AUX, MTX, MAIN operations
Channel meter
This indicates the signal level of the channel. For a stereo-
linked channel, two meters (L and R) are shown. The level
detection point is according to the setting in the METER
screen.
For details, refer to “Metering” (p. 59).
1.
Access the CHANNEL EDIT screen for the desired channel.
2.
Press [FUNC] to access the CHANNEL FUNCTION screen.
The operations available at the CHANNEL FUNCTION screen are
as follows:
For information on, NAME EDIT, COPY, PASTE, UNDO, LIBRARY,
or PEAK CLEAR, go to “Basic operation,“ and refer to “Editing a
name”(p. 33), “Copy“ (p. 28), “Paste“ (p. 29), “Undo“ (p. 29),
“Library“ (p. 30), or “Peak clear“ (p. 33).
For information on HOME SCREEN, go to “User Preference
settings,“ and refer to “Selecting the Home screen” (p. 95).
8
CHANNEL FUNCTION screen
LINK
Turns channel link on/off (p. 43).
NAME EDIT Specifies the channel name.
PATCHBAY Accesses the PATCHBAY screen (p. 43).
GROUP
ASSIGN
Assigns channels to DCA groups (p. 60) and mute
groups (p. 62).
COPY Copies channel settings to the clipboard.
PASTE When channel settings have been copied to the
clipboard, this pastes the settings from the
clipboard.
UNDO This undoes the last-performed parameter paste
operation. It is not displayed when there is no action
to undo.
LIBRARY Accesses the AUX/MTX/MAIN LIBRARY screen.
PEAK CLEAR Clears the level meter's peak hold or over indication.
HOME
SCREEN
Selects the unit's Home screen.
M-200i_e.book 42 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
