76
Scene memory
Scene memory
1.
Access the SCENE screen.
2.
From the scene list, select the desired scene and press
[ENTER]. A popup appears.
3.
Moving the cursor to the LOCK and pressing [ENTER]
locks or unlocks the scene.
1.
Access the SCENE screen.
2.
From the scene list, select the desired scene and press
[ENTER]. A popup appears.
3.
Move the cursor to the CLEAR and press [ENTER].
A message prompting you to confirm the operation is
displayed.
4.
Pressing [ENTER] deletes the scene you selected in step 2.
Pressing [EXIT] cancels the operation.
Clearing the data of a locked scene is not possible.
1.
Access the SCENE screen.
2.
Select the scene memory that you want to rename, and
press [ENTER]. A popup appears.
3.
Select the NAME EDIT and press [ENTER].
The NAME EDIT screen will appear.
For information on how to edit the name, refer to “Editing a
name“ (P.33).
1.
Access the SCENE screen.
2.
Press [FUNC] to access the SCENE FUNCTION screen.
The operations available at the SCENE FUNCTION screen are as
follows:
Locking/unlocking a scene
Clearing the data in a scene
Renaming a scene memory
SCENE FUNCTION screen
UNDO RECALL
This undoes the last-performed Scene
Recall operation.
DISPLAY DATE/TIME If this is on, scene list displays date or time.
M-200i_e.book 76 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
