54
COMPRESSOR/LIMITER screen
COMPRESSOR/LIMITER screen
1.
Access the LIMITER screen for the desired channel.
2.
Press [FUNC] to access the LIMITER FUNCTION screen.
The following functions are available at the LIMITER FUNCTION
screen.
For information on, COPY, PASTE, UNDO, LIBRARY, or PEAK
CLEAR, go to “Basic operation,“ and refer to “Copy“ (p. 28),
“Paste“ (p. 29), “Undo“ (p. 29), “Library“ (p. 30), or “Peak clear“ (p.
33).
For information on TYPE SELECT, refer to “Changing between
COMPRESSOR/LIMITER” (p. 52).
LIMITER FUNCTION screen
TYPE SELECT
This selects COMPRESSOR or LIMITER as the
compressor type.
COPY This copies the LIMITER settings to the clipboard.
PASTE When LIMITER settings have been copied to the
clipboard, this pastes the settings from the
clipboard.
UNDO This undoes the last-performed parameter paste
operation. It is not displayed when there is no action
to undo.
LIBRARY Accesses the LIMITER LIBRARY screen.
PEAK CLEAR Clears the level meter's peak hold or over indication.
M-200i_e.book 54 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
