90
Talkback
Talkback
1.
Access the TALKBACK screen.
2.
Press [FUNC] to access the TALKBACK FUNCTION screen.
The following functions are available at the TALKBACK FUNCTION
screen.
TALKBACK FUNCTION screen
MIC SELECT:
This selects the input jack for connecting the mic to
use for talkback.
If you don't use talkback, select “NONE.“
DESTINATION This selects the bus you want to use as the
destination for talkback.
Talkback and the oscillator share the same
output destination.
M-200i_e.book 90 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
