30
Basic operation
Basic operation
You can store settings for many of the functions of the M-200i
using LIBRARIES.
There are libraries for:
• Channels
• Buses
• Gates
• Compressors
• Limiters
•EQ
• Effects
• Input Patchbay settings
• Output Patchbay settings
This section describes the operations common to all LIBRARY
screens.
Target indication
This indicates currently displayed library, the target channel,
and other such information.
Library data list
1.
Access the desired LIBRARY screen.
2.
Verify that the desired channel, effect, or patchbay is
displayed.
3.
At the library data list, select the desired number, then
press [ENTER]. A popup appears.
4.
Move the cursor to RECALL and press [ENTER].
A message prompting you to confirm the operation is
displayed.
5.
Pressing [ENTER] recalls the data from the library and
closes the popup.
Pressing [EXIT] cancels the library data-recall operation.
When recalling data from the CHANNEL LIBRARY, a screen for
selecting the parameter to recall is displayed in step 4.
If the “SCENE/LIB RECALL” item in the CONFIRMATION section of
User Preference (p. 94) is not in effect, no confirmation message
will appear in step 4.
Library operations
LIBRARY screen
NO.
This indicates library data numbers.
Preset data numbers begin with a “P”.
User data numbers begin with a “U”.
NAME This indicates the name of the library data.
STATUS “P” is shown for preset data, and “L” is shown for
locked user data.
Recalling data from a library
1
2
M-200i_e.book 30 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
