84
SETUP screen
SETUP screen
1.
Access the SETUP screen.
2.
Select “INITIALIZE“ and press [ENTER].
The INITIALIZE screen is displayed.
3.
Select the sections to initialize.
The sections you can select are as follows:
SYSTEM SETTING includes the following items:
• The M-200i's sampling-frequency setting
• Panel and display brightness settings
• REAC settings
• Remote settings
4.
Move the cursor to the INITIALIZE button and press
[ENTER].
A message prompting you to confirm the operation is
displayed.
5.
Pressing [ENTER] initializes the sections you selected in
step 3.
Pressing [EXIT] cancels the operation.
Initializing the mixer settings
MIXER
PARAMETER
The mixer parameters are initialized.
SYSTEM SETTING The system settings are initialized.
NETWORK
SETTING
The network settings are initialized.
SCENE MEMORY The scene memory is deleted.
ALL LIBRARY All user libraries are initialized.
USER
PREFERENCE
The user preferences are initialized.
Attempting to initialize the scenes or libraries when
locked scenes or libraries exist makes a warning
message like the following appear:
Moving the cursor to the KEEP LOCKED DATA and
pressing [ENTER] initializes only the unlocked data,
leaving the locked data uninitialized.
Moving the cursor to the INITIALIZE ALL and pressing
[ENTER] initializes all data, including the unlocked data.
Pressing [EXIT] cancels the initialization operation.
M-200i_e.book 84 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
