78
USB memory recorder
USB memory recorder
Pressing buttons executes the following action at RECORDER
screens.
1.
Access the RECORDER screen.
2.
Press [FUNC] to access the RECORDER FUNCTION screen.
The operations available at the RECORDER FUNCTION screen are
as follows:
For information on PEAK CLEAR, go to “Basic operation,“ and
refer to “Peak clear“ (p. 33).
The song list shows the WAV files located in the “/RSS/M-400/
SONGS“ folder of USB memory in the order of their name.
1.
Access the RECORDER screen.
2.
Select “SONG LIST“ and press [ENTER].
The SONG LIST screen is displayed.
The following items are displayed :
WAV file number
This indicates the alphabetical order of the WAV files.
WAV file name
This indicates the name of the WAV file currently being
recorded or currently selected for playback.
Time indicator
This indicates time information for the WAV file currently
being recorded or played.
3.
Select the desired WAV file, and press [ENTER].
A popup will appear.
The operations available at this popup are as follows:
For information on how to edit the name, refer to “Editing a
name“ (p. 33).
Button
Function
REW This selects the previous WAV file.Holding this down
during playback rewinds the WAV file being played.
FF This selects the next WAV file.Holding this down
during playback fast-forwards the WAV file being
played.
REC This puts the USB memory recorder into recording
standby.
PLAY
STOP
This plays the WAV file selected as the current song.
RECORDER FUNCTION screen
SONG LIST
Shows the WAV files in the SONGS folder (p. 78).
PLAY MODE Cycles through the available playback modes.
REC LEVEL This adjusts the recording level of the USB memory
recorder in a range of -Inf dB to +10.0 dB.
REC L SOURCE These select the input sources for the USB memory
recorder (p. 79).
REC R SOURCE
PLAY L
DESTINATION
These select the output destinations for the USB
memory recorder (p. 79).
PLAY R
DESTINATION
PEAK CLEAR Clears the level meter's peak hold or over indication.
Using the USB memory recorder
Editing the song list
PLAY (STOP)
Plays the WAV file. (If a WAV file is playing, “STOP“ will
appear.)
DELETE Deletes the WAV file.
NAME EDIT Access the NAME EDIT screen, where you can edit
the name of the WAV file.
1
2
3
M-200i_e.book 78 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
Need help?
General
