SMC Networks TigerSwitch SMC6128L2 User Manual

P ORT C ONFIGURATION
3-121
Web – Click Port, LACP, Aggregation Port. Set the System Priority, Admin
Key, and Port Priority for the Port Actor. You can optionally configure
these settings for the Port Partner. (Be aware that these settings only affect
the administrative state of the partner, and will not take effect until the
next time an aggregate link is formed with
this device.) After you have
completed setting the port LACP parameters, click Apply.
Figure 3-53. LACP Aggregation Port Configuration

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English