C
OMMAND
L
INE
I
NTERFACE
4-156
Broadcast Commands
This section describes how to configure broadcast storm control for the
switch.
broadcast packet-rate
This command configures the global broadcast storm control threshold
level.
Syntax
broadcast packet-rate rate
rate - Threshold level as a rate; i.e., packets per second.
(Range: 240 - 1488100)
Default Setting
500 packets per second
Command Mode
Global Configuration
Command Usage
• When broadcast traffic exceeds the specified threshold, packets above
that threshold are dropped.
• The specified threshold value applies to all ports on the switch.
Table 4-44 Broadcast Commands
Command Function Mode Page
broadcast
packet-rate
Configures the global threshold level GC 4-156
switchport
broadcast
Enables broadcast storm control for an
interface
IC 4-157
show interfaces
switchport
Displays the administrative and operational
status of an interface
NE,
PE
4-154
To Next Page
Loading...
Need help?
General
