SMC Networks TigerSwitch SMC6128L2 User Manual

C OMMAND L INE I NTERFACE
4-46
Note: The switch supports both SSH Version 1.5 and 2.0.
The SSH server on this switch supports both password and public key
authentication. If password authentication is specified by the SSH client,
then the password can be authenticated either locally or via a RADIUS or
TACACS+ remote authentication server, as specified by the
authentication login command on page 4-92. If public key
authentication is specified by the client, then you must configure
authentication keys on both the client and the switch as described in the
Table 4-15 Secure Shell Commands
Command Function Mode Page
ip ssh server Enables the SSH server on the switch GC 4-48
ip ssh timeout Specifies the authentication timeout for the
SSH server
GC 4-49
ip ssh
authentication-retries
Specifies the number of retries allowed by a
client
GC 4-50
ip ssh server-key size Sets the SSH server key size GC 4-51
copy tftp public-key Copies the user’s public key from a TFTP
server to the switch
PE 4-84
delete public-key Deletes the public key for the specified user PE 4-51
ip ssh crypto
host-key generate
Generates the host key PE 4-52
ip ssh crypto zeroize Clear the host key from RAM PE 4-53
ip ssh save host-key Saves the host key from RAM to flash
memory
PE 4-53
disconnect Terminates a line connection PE 4-24
show ip ssh Displays the status of the SSH server and
the configured values for authentication
timeout and retries
PE 4-54
show ssh Displays the status of current SSH sessions PE 4-54
show public-key Shows the public key for the specified user
or for the host
PE 4-56
show users Shows SSH users, including privilege level
and public key type
PE 4-81

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English