SMC Networks TigerSwitch SMC6128L2 User Manual

C OMMAND L INE I NTERFACE
4-40
Web Server Commands
ip http port
This command specifies the TCP port number used by the web browser
interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Related Commands
ip http server (4-41)
Table 4-12 Web Server Command
Command Function Mode Page
ip http port Specifies the port to be used by the web
browser interface
GC 4-40
ip http server Allows the switch to be monitored or
configured from a browser
GC 4-41
ip http
secure-server
Enables HTTPS/SSL for encrypted
communications
GC 4-41
ip http secure-port Specifies the UDP port number for HTTPS/
SSL
GC 4-43
Console(config)#ip http port 769
Console(config)#

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English