SMC Networks TigerSwitch SMC6128L2 User Manual

C OMMAND L INE I NTERFACE
4-256
Command Usage
Enter this command without any keywords to display the global
settings for MVR. Use the interface keyword to display information
about interfaces attached to the MVR VLAN. Or use the members
keyword to display information about multicast groups assigned to the
MVR VLAN.
Example
The following shows the global MVR settings:
The following displays information about the interfaces attached to the
MVR VLAN:
Console#show mvr
MVR Status:enable
MVR running status:TRUE
MVR multicast vlan:1
MVR Max Multicast Groups:255
MVR Current multicast groups:10
Console#
Table 4-71 show mvr - display description
Field Description
MVR status Shows if MVR is globally enabled on the switch.
MVR running status Indicates whether or not all necessary conditions in the
MVR environment are satisfied.
MVR multicast vlan Shows the VLAN used to transport all MVR multicast
traffic.
MVR max multicast
groups
Shows the maximum number of multicast groups which can
assigned to the MVR VLAN.
MVR current
multicast groups
Shows the number of multicast groups currently assigned to
the MVR VLAN.
Console#show mvr interface
Port Type Status Immediate Leave
------- -------- ------------- ---------------
eth1/1 SOURCE ACTIVE/UP Disable
eth1/2 RECEIVER ACTIVE/UP Disable
eth1/5 RECEIVER INACTIVE/DOWN Disable
eth1/6 RECEIVER INACTIVE/DOWN Disable
eth1/7 RECEIVER INACTIVE/DOWN Disable
Console#

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English