SMC Networks TigerSwitch SMC6128L2 User Manual

C OMMAND L INE I NTERFACE
4-214
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Table 4-59 GVRP and Bridge Extension Commands
Command Function Mode Page
bridge-ext gvrp Enables GVRP globally for the
switch
GC 4-214
show bridge-ext Shows the global bridge extension
configuration
PE 4-215
switchport gvrp Enables GVRP for an interface IC 4-216
switchport forbidden vlan Configures forbidden VLANs for
an interface
IC 4-205
show gvrp configuration Displays GVRP configuration for
the selected interface
NE,
PE
4-216
garp timer Sets the GARP timer for the
selected function
IC 4-217
show garp timer Shows the GARP timer for the
selected function
NE,
PE
4-218

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English