C
OMMAND
L
INE
I
NTERFACE
4-64
Related Commands
show logging sendmail (4-69)
show log
This command displays the log messages stored in local memory.
Syntax
show log {flash | ram}
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory
flushed on power reset).
Default Setting
None
Command Mode
Privileged Exec
Table 4-20 show logging trap - display description
Field Description
Syslog logging Shows if system logging has been enabled via the logging
on command.
REMOTELOG
status
Shows if remote logging has been enabled via the logging
trap command.
REMOTELOG
facility type
The facility type for remote logging of syslog messages as
specified in the logging facility command.
REMOTELOG
level type
The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
REMOTELOG
server IP address
The address of syslog servers as specified in the logging
host command.
To Next Page
Loading...
Need help?
General
