SMC Networks TigerSwitch SMC6128L2 User Manual

C OMMAND L INE I NTERFACE
4-212
switchport private-vlan host-association secondary-vlan-id
no switchport private-vlan host-association
secondary-vlan-id - ID of secondary (i.e., community) VLAN. (Range:
1-4093, no leading zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
All ports assigned to a secondary (i.e., community) VLAN can pass
traffic between group members, but must communicate with resources
outside of the group via promiscuous ports in the associated primary
VLAN.
Example
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the no
form to remove this mapping.
Syntax
switchport private-vlan mapping primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id - ID of primary VLAN. (Range: 1-4093, no leading
zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config-if)#

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English