Sony DCR-TRV103 User Manual

2-5
a
LANC
jack
VC-213
VC-213
a
a
b
b
!º Cabinet (L)
assembly
Cabinet (R) assembly
AC POWER
ADAPTOR
Panel (N) (front) assembly
FP-77 flexible board (22P)
AC IN
Adjustment remote
commander (RM-95)
DC IN
6 Disengage the claw
that fixes the flexible board.
Remove it in the direction
of the arrow
a .
Remove it gently as a thin flexible
board is held by a claw.
9 Jack cover
Cabinet (L) assembly
4 Screw (M2 × 4),
lock ace, p2
8 Screw (M2 × 3)
!¡ Two screws
(M2
× 3)
!™ MD frame (B)
1 Screw (M2 × 3)
3 MD frame (B)
and IM shield
assembly
2 Remove the shield
plate by sliding it in
the arrow direction.
In the PAL models, remove
the MD frame (B) after
completing step
!¡ .
2 Cassette lid assembly
3 Screw (M2 × 4),
lock ace, p2
1 Two screws (M2 × 3),
lock ace, p2
b
Remove it in the direction
of the arrow
b .
7 Screw
5 Battery panel (P)
assembly
Battery panel (P) assembly
Base
(Use box or the like.)
[MECHANISM DECK CHECK SERVICE POSITION]
• How to move up the cassette
compartment manually
PAL MODELS ONLY
Press the cassette compartment
in the direction of the arrow
c
to move it up in the direction of
the arrow
d .
c
d
Note
Note
Note
Note: the TR models do not have the harness
(DP-74 (2.5 INCH LCD MODEL)
or DP-75 (3.0/3.5 INCH LCD MODEL))
shown by Note.
Note: the TR models do not have the harness
(DP-74 (2.5 INCH LCD MODEL)
or DP-75 (3.0/3.5 INCH LCD MODEL))
shown by Note.
2-5. MECHANISM DECK

Sony DCR-TRV103 Specifications

General

Brand	Sony
Model	DCR-TRV103
Category	Camcorder
Language	English