6.3 Engine control system WiCE
6.3.1 General
The engine control system (ECS) is an embedded system that has a modular design. Some
parts and functions in the ECS system configuration are optional and are related to the
application.
The name of the WinGD engine control system is WinGD integrated Control Electronics (WiCE).
It has the items that follow:
•
Cylinder control unit (CCU #1 to #n)
The cylinder control units (CCU #1 to #n) for each cylinder are installed on the rail unit in
the terminal boxes E95.nn. The CCU have different cylinder-related and engine-related
control functions. The CCU also have redundant global functions for the engine control.
•
Main control unit (MCU #1 to #3)
The main control units (MCU #1 to #3) are installed in the terminal boxes E27.1 to E27.3.
The MCU have functions for speed control, engine control and common engine functions
(for example starting air shut-off valve).
•
Gateway unit (GTU #1 and #2)
The gateway units (GTU #1 and #2) are installed on the rail unit in the terminal box E90.
The GTU transmits data to and from external control systems.
•
Manual control panel (MCP)
One manual control panel (MCP) is installed at the local maneuvering stand at the free
end. The other MCP is installed in the engine control room (ECR). External control
systems transmit data to the MCP. The MCP gives the operator a graphical user interface
for access to data and system adjustments.
•
Angle calculation module (ACM #1 and #2)
The optional angle calculation modules (ACM #1 and #2) are installed in the terminal
boxes E96.1 and E96.2.
Redundant system buses connect all these modules.
Software updates must be done only with the supervision of a WinGD service engineer and in
accordance with regulations that WinGD has set.
X92DF
AA00-0000-00AAC-043K-A
Operation Manual Engine control system WiCE
Winterthur Gas & Diesel Ltd.
- 270 - Issue 002 2020-08
To Next Page
Loading...
Need help?
General
