PROCEDURE
Fig 6-54 MCP page - MAIN locked
Legend
001 UNLOCK button 002 Navigation field
1 To unlock the function buttons, do the steps that follow:
1.1 Touch the UNLOCK button (001, Figure 6-54) with your finger.
1.2 Hold the finger on the button until the green circle is complete.
1.3 Release the finger.
2 To start a function with a function button, shortly touch the related function button.
NOTE: When the function is active, the LED indication comes on.
NOTE: You only can start one function at the same time, also when you touch two or
more function buttons.
3 To change the control location, do the steps that follow:
3.1 Shortly touch the function button for the related control location.
3.2 If necessary, confirm the transfer on the related MCP.
4 To change between MCP pages, do the steps that follow:
4.1 Shortly touch the related button in the navigation menu (002).
4.2 If applicable, shortly touch the related sub menu button.
X92DF
AA00-4618-00AAC-131A-A
Operation Manual Operate the manual control panel (MCP)
Winterthur Gas & Diesel Ltd.
- 385 - Issue 002 2020-08
To Next Page
Loading...
Need help?
General
