1/05
8a-17
DocuColor 12/DCCS50
REP 2.7.7
High Capacity Feeder
Reissue
REP 2.7.7 HCF Elevator Long/Short Cables
Parts List on PL 15.3
Removal
WARNING
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Assembly (REP 2.7.5).
2.
Remove the Front Cover to access the Long Cables only. (Figure 1).
Fi
gure 1 Removing the Front Cover
3. Remove the Cables (Figu
re 2).
Figure 2 Removing the Cable from the Drive Shaft.
4. Remove the Cables from the Front Pulley's (Figure
3).
2. Remove the cover
1. Remove the
Screws (4)
1. Remove the screw
3. Pull out the cables
2. Slide the Pulley
To Next Page
Loading...
Need help?
General
