1/05
4-179
DocuColor 12/DCCS50
REP 13.6.1
Repairs and Adjustments
Reissue
REP 13.6.1 Bin Trays 2 - 10
Parts List on PL 13.6
Removal
WARNING
Turn power off and disconnect the power plug.
NOTE: This page describes how to disassemble Bin Tray 2.
NOTE: To remove any Bin Tray (n), first remove Bin Trays 1 to (n-1).
1. Remove the Bin Tray 1 (R
EP 13.5
.2).
2. Remove the Bin Tray Pawl from the gate (Figur
e 1).
Figure 1 Remove the Bin Tray Pawl
3. Remove the Bin Panel (Numbered Panel) (PL 13
.4).
4. Remove Bin Tray 2 (Figu
re 2).
1. Disconnect the connector.
2. Remove the screws (3).
3. Remove bin tray 2.
Figure 2 Remove Bin Tray 2
Installation
1. Reinstall the parts in the reverse order of disassembly.
To Next Page
Loading...
Need help?
General
