Xerox DocuColor 12/DCCS50 User Manual

1/05
2-211
DocuColor 12/DCCS50
11-918 Bin 8 Full Stack RAP, 11-919 Bin 9 Full Stack
Status Indicator RAPs
Reissue
11-918 Bin 8 Full Stack RAP
The Control Logic detected that Bin 8 is full.
NOTE: If this machine has a Finisher/Sorter Accessory, go to Section 8D, 11-918 Bi
n 8 Full
Stack RAP to troubleshoot this Fault Code.
Initial Actions
• Refer to BSD11.6 for the following procedure.
• Ensure that Bin 8 is empty
Procedure
Enter dC330 011-288 Bin 8 Full Sensor. Press Start. Manually move the actuator in and out
of the sensor The display Changes from H to L to H as the actuator is moved in and out
of th
e sensor.
YN
Replace the Mail Box Control PWB (PL 13.10).
Check the Bin 8 Full Sensor for intermittent operat
ion. I
f the problem continues, replace the
Mail Box Control PWB (PL 13.10).
11-919 Bin 9 Full Stack RAP
The Control Logic detected that Bin 9 is full.
NOTE: If this machine has a Finisher/Sorter Accessory, go to Section 8D, 11-919 Bi
n 9 Full
Stack RAP to troubleshoot this Fault Code.
Initial Actions
• Refer to BSD11.6 for the following procedure.
• Ensure that Bin 9 is empty
Procedure
Enter dC330 011-289 Bin 9 Full Sensor. Press Start. Manually move the actuator in and out
of the sensor The display Changes from H to L to H as the actuator is moved in and out
of t
he sensor.
YN
Replace the Mail Box Control PWB (PL 13.
10).
Check t
he Bin 9 Full Sensor for intermittent operation. I
f the problem continues, replace the
Mail Box Control PWB (PL 13.10).

Xerox DocuColor 12/DCCS50 Specifications

General

Brand	Xerox
Model	DocuColor 12/DCCS50
Category	All in One Printer
Language	English