1/05
10-180
DocuColor 12/DCCS50
Eject Paddle Motor
Reissue
Principles of Operation
Eject Paddle Motor
The Finisher PWB switches on the Eject Paddle Motor (Figure 1). The Eject Paddle Drive Belt
transmits drive to the Paddle Shaft Assembly. Paddles on the Assembly drive a stapled set of
paper into the Finisher Tray. The Eject Paddle Home Sensor monitors the home position of the
Paddle Shaft Assembly (Figure 2).
Figure 1 Eject Paddle Motor and Its Associated Components
Eject Paddle Mechanical Drive Components
1. Eject Paddle Motor
A +24 VDC motor. Provides drive for the Paddle Shaft Assembly.
2. Eject Paddle Motor Drive Belt
Transmits Set Clamp Motor drive to the Paddle Shaft Assembly.
3. Eject Paddle Home Position
Monitors the home position of the Paddle Assembly.
manuals4you.commanuals4you.com
To Next Page
Need help?
General
