Xerox WORKCENTRE 7425 User Manual

Printing
WorkCentre 7425/7428/7435
User Guide
52
3. Before loading paper into the paper trays, fan the edges. This procedure separates any sheets of
paper that are stuck together and reduces the possibility of paper jams.
Load the paper against the left-hand side of the tray.
Do not load paper above the maximum fill line. Doing so may cause paper jams.
Note: To avoid paper jams and misfeeds, do not remove paper from its packaging until required.
4. Slide the guides so they just touch the edges of the paper.
5. Push the tray completely into the printer.
6. If required, touch Change Settings on the touch screen, then choose paper size, type, or color on
the printer’s touch screen, touch Save, then touch Confirm.
7. Set the printer to detect the paper size you loaded automatically, or manually specify the size
using the touch screen.
8. If you have not changed the media type, touch Confirm on the touch screen.
Loading Media in Tray 5 (Bypass)
The bypass tray allows you to use a variety of media types. It is primarily intended for small quantity
jobs using special media. The bypass tray is located on the left-hand side of the printer. A tray
extension is provided to accommodate larger paper. After loading paper in the bypass tray, make sure
that the bypass tray settings on the touch screen match the paper size and type loaded.
wc74xx-01
2
wc74xx-013

Xerox WORKCENTRE 7425 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7425
Category	All in One Printer
Language	English